Assembly Instructions
36
Step 1
Keep Nuts Hand Tight.
Install the Left Axle and Right Axle to the
Tow Bar. Use 4- 5/16” x 3” Bolts and 5/16”
Nyloc Nuts.
Install Axle Support between Left and Right
Axles and secure with 2- 5/16” x 3” Bolts
and 5/16” Nyloc Nuts.
Step 2
Install Axle Cross Support between Left and
Right Axles. Use 4- 5/16” x ¾” Bolts, 5/16
Flat Washer, and 5/16” Nyloc Nut.
Install Axle Gusset to Tow Bar and Axle
Cross Support. Use 2- 5/16” x 2 ½” Bolt, 2-
5/16” x ¾” Bolt, and 4- 5/16” Nyloc Nut.
Using a Torque Wrench, tighten all bolts to
20 lb-ft.
Step 3
Install Leg to Tow Bar using 5/16 x 2-3/4
Bolt and 5/16 Nyloc nut.
Install Catch Pin through Hole in Tow Leg,
as shown.
Note: Do not over tighten – leg must swing
freely.
Tow Bar
Axles
5/16” x
3” Bolt
5/16”
Nyloc
Nut
Axle
Support
5/16” Nyloc Nut
Axle
Gusset
Tow Bar
5/16” x ¾”
Bolt
5/16” x 2-1/2”
Bolt
Flat Washer
Axle Cross Support
5/16” Nyloc
Nut
5/16” x 2-3/4”
Bolt
Leg
Catch Pin
Tow Bar
