37
WARNING
BEFORE operating the engine, be sure to read this section of the manual, otherwise injury to
personnel or damage to equipment may occur.
Engine
starting
components
1.
Fuel Valve
When the fuel valve is in the ON position, fuel is allowed to flow from the fuel tank to the
carburetor. Be sure to return the fuel valve to the OFF position after stopping the engine.
2.
Choke Lever
The choke is used to provide an enriched fuel mixture when starting a cold engine. It can be
opened and closed by operating the choke lever manually. Move choke lever to the left toward
CLOSED to enrich the mixture for cold starting.
3.
Engine Switch
Turn the switch ON, (and pull recoil) to run the engine and to stop the engine turn the switch OFF.
4.
Recoil
To start the engine, pull the starter rope lightly until resistance is felt, then pull briskly.
5.
Throttle Lever
The throttle lever controls the engine speed. Pump Output is controlled by adjusting the throttle
lever.
Displacement
212
Starting Type
Recoil/Electric Start
Ignition Type
Transistorized Magneto Ignition
Lubricating Type
Splash
Model
212cc
Spark Plug Gap
0.7
~
0.8mm (0.028
~
0.03in)
Spark Plug Torque
20-30N.m
Intake Valve Clearance
0.08
~
0.12mm (0.003
~
0.005in)
Exhaust Valve Clearance
0.13
~
0.17mm (0.005
~
0.007in)
WARNING:
Improper maintenance or failure to correct a problem before operation can cause a malfunction in
which you can be seriously hurt or killed. ALWAYS follow the inspection and maintenance
recommendations and schedules in this manual.
Engine Manual
1
5
4
3
2
