12
Axel
Base
Step 2. Assembly
Note: Remove contents from box and assembly can
occur at this time.
Wheel to Base Assembly
1.
Install wheels on the pressure washer base
using:
•
(2) Axles
•
(2) Hair Pins
Handle to Base Assembly
3.
Install handle to the pressure washer base.
The handle snaps into place.
Handle
Wheel
Pin
Gun Hook Assembly
4.
Attach upper gun hook on the pressure washer
handle using the existing hardware installed on
the right side of the panel:
•
(2) M6 x 55 bolts
•
(2) Flat washers
•
(2) Bushings
•
(2) M6 lock nuts
Repeat the process as pictured to install the wheel on
opposite side.
Check that wheels turn freely.
Foot to Base Assembly
2.
Attach foot to the pressure washer base
using:
•
(1) M8 lock nut
5.
Attach lower gun hook on the pressure washer
base using hardware supplied in the manual
bag:
•
(1) M6 x 45 bolt
•
(1) Flat washer
•
(1) M6 lock nut
Flat Washer
Upper Gun
Hook
M6 x 55
Bolt
M6 x 45
Bolt
Flat
Bushing
M6
Lock Nut
Washer
After completing this step the pressure washer cart
assembly may now be placed right side up, ensuring that
the wheels and leg are on a flat surface.
Lower
Gun
Hook
M6 Lock
Nut
