Maintenance & Repair (continued)
49
e)
Install the spark plug. Torque specification is 14.8 ft. lbs. If a torque
wrench is not available, a good estimate of the correct torque is 1/4-
1/2 turn past finger tight.
f)
Install the spark plug cap and left side cover and screws.
Fuel Tank Filter Check/Replacement
a)
Remove the fuel tank cap and filter.
b)
Clean the filter with gasoline.
c)
Wipe the filter and install it.
d)
Install the fuel tank cap.
Fuel Filter Check/Replacement
a)
Open left side cover by turning screw ¼ turn.
b)
Slide the hose clamp 2 away from the filter 3 and pull the fuel hose 1
off the fuel filter.
c)
Slide the hose clamp 4 away from the filter and pull the fuel hose 5
off the filter.
d)
Inspect filter for debris, clean with gasoline, and replace if needed.
e)
Dry the filter and reinstall on the hoses and hose clamp.
f)
Close the left side cover and secure by turning screw ¼ turn.
Standard Spark Plug:
BPR6ES/BP6ES (NGK)
or
F7RTC/F7TC
Spark Plug Gap:
0.6-0.8mm (0.024-0.031in)
1
2
3
4
3
5