Powergen Digit 3001, Instruction Manual

Page: 11 / 26

I
NSTRUCTIONS
M
ANUAL
D
IGIT
3001
R
ELEASE
. N.2_M 13_10_08
P
OWERGEN
S.
R
.
L
. V
IA
XXV A
PRILE
, 5 L
OC
. C
ORSALONE
C
HIUSI DELLA
V
ERNA
(A
REZZO
)
)
+39-(0)575-531015 - T39-(0)575-511891 E mail borri@elledi.it
www.batterychargerpowergen.it P.Iva 01572290516 - 11 -
7. REQUEST OF SPARE PARTS AND/OR SERVICE REQUEST
q
We recommend to always advise the serial number of the battery charger.
8. DIGIT 3001
DIGIT 3001 allows to select the operation modes and the execution time of charging
cycles via dip-switch DSW1 included in the card:
- Operation mode: programming (Program) or charge (Charge) ;
-
Operation time: normal (Normal) or concentrated (Test) . In Test mode, time is
reduced by a factor 60, for example 1 hour = 1 minute.
Switching between operation modes and between execution times can be done by directly
selecting the correct position of the dip-switch, as shown on the card silk screen print,
without disconnecting the supply during the charging cycle and in the programming
phases.
DIGIT 3001 is provided with a control panel with six LED's displaying the operating status
of the battery charger, with a four digit display showing the charging parameters and with a
keyboard to programme and read parameters and functions settings.
This card is also provided with a standard serial interface RS232 for communication with
Personal Computer and external devices.
The LED's included in the control panel show the following conditions:
1. red LED power failure
2. yellow LED battery connected
3. yellow LED timed charging cycle
4. green LED charge completed
5. red LED safety cycle
6. yellow LED equalized charge
__ __ __ __ __ __
/
__ __