Car safety jacket
• Introduction
Congratulations on your purchase. You have chosen a
high quality product. The instructions for use are part of this
product. Please familiarise yourself with all instructions for
use and safety instructions before using the device. Only
use the product as described and for the stated areas of
use. Hand over all documents when passing on the product
to a third party.
• Information note
Safety jacket
Category II, class: 2.2 Certification EN 471:2003 +
A1:2007
TÜV Rheinland LGA Products GmbH (0197), Tillystraße 2D
- 90431 Nuremberg
• Use
The garments correspond to the safety characteristics
of the European Norm E471:2003+A1:2007 with
regards to the high visibility requirements. Safety is
only guaranteed, if the garment is a suitable size
and is buttoned up properly. Before use you should
make sure that the garment is clean and that there
are no rips, unstitched seams or other defects, that
could restrict its properties. NOTE: The visibility
properties of the garments are to be seen as
restricted if these items are not completely clean
or have been subjected to unauthorised changes.
• Usage restrictions
The garment is for use in the case of a limited range
of vision. It is NOT to be used as protection against
chemical risks, heat and fire, cold, electricity or any
other risks.
• Storage instructions
The garments must be stored in their original
packaging, in a cool, dry place without dust, away
from heat sources and direct light.
• Performance level
X = luminous and reflective materi-
al class (minimal areas with visible
material in m
2
)
1 = luminous 0.14 m
2
reflective 0.10 m
2
2 = luminous 0.50 m
2
reflective 0.13 m
2
3 = luminous 0.80 m
2
reflective 0.20 m
2
Y = luminous depth coefficient of
the reflective material.
1= schema VI EN
471:2003+A1:2007
2= schema VI EN
471:2003+A1:2007
• CE mark
The CE mark on a product means that the product
corresponds to the requirements of the European
guideline 89/686/EEC and has been checked by
an accredited institute.
GB 11
X
Y
