Powerfix Profi 309587, Operating Instructions And Safety Instructions

Page: 34 / 142

PowerFix PEKK 4.3 A1
32 - English
5.4.2 Lighting
There are 4 LEDs in the camera head [10]. You can switch on the lighting by
pressing the Light button [3]. Pressing this button multiple times will stepwise
increase the LED brightness. There are 8 adjustable levels. Once the highest
level has been reached, pressing the Light button [3] again will turn the light
off. If you change the brightness setting and then power the camera off and
back on, the light brightness will be reset to the default value.
This is a special lamp is not suitable for domestic room
illumination but intended to illuminate the working space only.
5.4.3 Display brightness
You can use the Brightness button [9] to adjust the brightness of the display [5].
Pressing this button multiple times will stepwise increase the display [5]
brightness. There are 8 adjustable levels. Once the highest level has been
reached, pressing the Brightness button [9] again will reset the brightness to the
default value. The brightness will also be reset to the default value if you power
the camera off and back on.
5.4.4 Zoom function
You can use the Zoom button [4] to enable the zoom function. Press this button
to increase the zoom stepwise. There are two zoom levels available. Once the
highest zoom level has been reached, pressing the Zoom button [4] again will
disable the zoom. The zoom will also be reset to the default value if you power
the camera off and back on.
5.4.5 Customising the display
Press the Rotate view button [8] to rotate the camera picture 180 degrees or to
flip it horizontally or vertically. This setting allows you to show the recordings in
four different views. If you change the setting and then power the camera off
and back on, the picture display will be reset to the default value.