Powerfist 8942724, Manual

Page: 7 / 36

V1.0 12V DC Winch 8942724
Visit www.princessauto.com for more information 7
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the missing
part before operating. Failure to do so could result in a malfunction and
personal injury.
Remove the parts and accessories from the packaging and inspect for damage. Make
sure that all items in the contents are included.
Contents:
• Winch • Tethered Remote • Hawse Fairlead
• Hook with Strap • Grade 8, M10-1.50x30 mm (4)
• Grade 8 M12-1.75x25 mm
IDENTIFICATION KEY
A Wiring
B Wire Cable
C Control Pack
D Clutch
E IN Button
F Remote
G OUT Button
H Winch
I Hawse Fairlead
J Hook
K Strap
ASSEMBLY & INSTALLATION
Use the included hardware to attach the winch to the location and the fairway
to the winch.
1.
Install a mounting plate that is capable of withstanding the stresses
acting upon it without bending or breaking (see Specifications). The drum
supports must sit flush with no gaps.
2. This winch can generate extreme forces. Select a location that can
withstand the rated capacity without damage or weakening. Steel
reinforcement plates may be needed or a certified welder may need to
weld on additional bracing depending on the mounting location.
Fig. 1