Powerfist 8942724, Manual

Page: 12 / 36

8942724 12V DC Winch V1.0
12 For technical questions call 1-800-665-8685
POWER CONSUMPTION
The winch requires more amps to move a heavier load. Consult Table 2 to
determine the amperage consumption based on the load’s weight.
A snatch block increases a winch’s pulling power without an increase in amperage.
Using a snatch block can halve the power required.
OVERLOAD
The overload protection may kick in if the winch becomes overheated. Allow
several minutes for the winch to cool before pressing the overload reset button
to continue pulling the load.
NOTICE! Do not press and hold the reset button while winching. This can
damage the winch.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at all times.
6. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
Clean the external surfaces with cloth after each use.
Weight Pull Line Speed Amp Draw Max Pull Length
0 lb (0 kg) 21 FPM (6.4 m/min) 80 VDC 65 ft (20.0 m)
3,000 lb (1,361 kg) 11 FPM (3.4 m/min) 160 VDC 20 ft (6.1 m)
6,000 lb (2,722 kg) 8 FPM (2.4 m/min) 260 VDC 8 ft (2.4 m)
9,000 lb (4,082 kg) 6 FPM (1.8 m/min) 280 VDC 3 ft (1.0 m)
12,000 lb (5,443 kg) 5 FPM (1.5 m/min) 360 VDC 1 ft (0.3 m)
Table 2