1. Turns your workpiece at any angle for straight, curved or irregular cuts.
2. 460mm//18” handle gives you plenty of leverage for cutting stainless steel,mild steel
or aluminum.
3.Replaceable 100mm//4” hardened alloy steel cutting blades.
9. Do not overreach.
Keep proper footing and balance at all times. Do not reach over or
across running machines. Keep hands and fingers clear of the Roll Dies when operating.
10. Maintain tools with care.
Keep tools sharp and clean for better and safer performance.
Follow instructions for lubricating and changing accessories. Inspect tool cords
periodically and, if damaged, have them repaired by an authorized technician. The
handle must be kept clean, dry, and free from oil and grease at all times.
11. Stay alert.
Watch what you are doing, use common sense. Do not operate any tool
when you are tired.
12. Check for damaged parts.
Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform its
intended function. Check for alignment and binding of moving parts; any broken parts
or mounting fixtures; and any other condition that may affect proper operation. Any part
that is damaged should be properly repaired or replaced by a qualified technician. Do
not use the tool if any switch does not turn on and off properly.
13. Guard against electric shock.
Prevent body contact with grounded surfaces such as
pipes, radiators, ranges and refrigerator enclosures.
14. Replacement parts and accessories.
When servicing, use only identical replacement
parts. Use of any other parts will void the warranty. Only use accessories intended for
use with this tool.
15. Do not operate tool if under the influence of alcohol or drugs.
Read warning labels
if taking prescription medicine to determine if your judgment or reflexes are impaired
while taking drugs. If there is any doubt, do not operate the tool.
16. Maintenance.
For your safety, service and maintenance should be performed regularly
by a qualified technician.
17. Workpiece may be sharp.
After bending or cutting workpieces use caution. Be aware
of sharp edges or sharp shreds of metal that may be created. Use heavy duty gloves
when handling the workpiece.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
FEATURES
Visit www.princessauto.com for more information
3
8536591
a full face shield if you are producing metal filings or wood chips. Wear an ANSI approved
dust mask or respirator when working around metal, wood, and chemical dusts and mists.
THROATLESS SHEAR
