3. Hardware Installation
Sound card connection
The Real Angel 330 TV Tuner card provides external connections to your sound card (Line-In).
To achieve maximum audio quality, users are not suggested to use the internal and external connections simultaneously.
1--- Sound card line input port
2--- Audio cable’s other port
3--- Multiple function cable output port
Connect Method: One port of Audio cable connects sound card line input or Microphone input (not recommended);
another port connects with multiple function cable output.
Note
External audio cable is color-coded. Connect the plug to the Audio-Out port on PCI Tuner card and the blue plug to
“Line-In” port of your sound card or main board.
To achieve the best performance, the TV Tuner card should not share its IRQ. Please refer section on troubleshooting for
further details.
Confirmation
•
Check all your connections, including power and audio.
•
Make sure it’s working properly before putting back your computer case. Test it out by plugging in power cord. If
your computer is not booting up please check your cable connections again.
•
Replace the computer cover
TV and FM antenna
To complete your hardware installation, connect the FM antenna to the upper connector and your TV signal to the lower
connector. Adjust FM antenna for optimal reception.
Now you’re ready to move forward! You’re one step closer to enjoying your Real Angel 330. Please refer to the following
notes and proceed to the next step.