background image

 

 

63

x

 Important Safety Instructions

 

z

  Openings in the case are provided for ventilation. Do not block or cover 

these openings. Make sure you provide adequate space around the 
system for ventilation when you set up your work area. Never insert 
objects of any kind into the ventilation openings. 

z

  To avoid electrical shock, always unplug all power cables and modem 

cables from the wall outlets before removing covers. 

z

  Lithium Battery provided (real time clock battery) 

“CAUTION – Risk of explosion if battery is replaced by an incorrect 
type.  Dispose of used batteries according to the instructions”

 

z

  If one of the following situations arises, have the equipment checked by a 

service personnel: 

A. 

The power cord or plug is damaged. 

B. 

Liquid has penetrated into the equipment. 

C. 

The equipment has been exposed to moisture. 

D. 

The equipment has not work well or you can not get it work 
according to user‘s manual. 

E. 

The equipment has dropped and damaged. 

F. 

If the equipment has obvious sign of breakage. 

Summary of Contents for cPCIS-6235R Series




































































Reviews: