PowerBoss Nautilus Hi-Dump PB45HDSL, Service Booklet, Page: 114 / 117

6. Bring the rear half of the side skirt to the outside of the scrub head side plate.
7. Insert two plastic fasteners 600965 through the two holes in the rear (longer) skirt retainer bar
731363 and through the front of the side skirt (see scrub head lift group 730113 parts manual
pages).
8.
Insert the two fasteners through from the outside of the scrub head side plate. Using a small
hammer tap the center pins flush with the head of the fastener.
9.
Reinstall the hinge pin 730642 and replace the lower snap ring 600569 being careful not to over-
expand the snap ring.
This completes the installation of the front and side skirts
CMK 8-27-2014