Admiral 38C Scrubber PB# 4100055UM Rev.* 08/10
PowerBoss, Inc. Copyright 2010
Page 35
Operation
Buttons controlling
the solution supply
(Fig. 17/11) The
solution consumption
used during cleaning
can be regulated in seven stages. Accord-
ingly, there are seven green control lamps
on the keypad. Each lamp relates to one
stage. The maximum quantity which can
be used for cleaning is 5.5 l/min (all seven
lamps are on). The minimum quantity is
1.25 l/min (only the left lamp is on). The
last solution quantity selected is always
used. When the scrubbing program is
switched on for the first time, a solution
quantity of approx. 3.5 l/min is automati-
cally set.
Button to reduce solution
quantity
(Fig. 17/12) The button serves
to reduce the solution quantity
supplied to the brushes. The solution
quantity can be reduced in seven stages
(see above). The selected stage remains
programmed (last station memory) even if
the vehicle is switched off temporarily.
Button to switch the solution
supply on and off
(Fig. 17/13) This button serves to
switch the solution feed on and off
when the brush head is lowered.
The so-
lution quantity previously set remains
unaltered (last station memory).
Button to increase solution
quantity
(Fig. 17/14) This button serves
to increase the solution quantity
supplied to the brushes. The solution
quantity can be increased in seven stages
(see above). The selected stage remains
programmed (last station memory) even if
the vehicle is switched off temporarily.
Green PowerBoss button for
simultaneous activation of
scrubbing unit and vacuuming
function
(Fig. 17/15) After pressing the
green PowerBoss button, the most impor-
tant basic functions for standard cleaning
are switched on and off automatically in
the correct sequence for the respective
technical application: suction turbines,
brush rotation, solution feed and lowering
or raising of the brushes and squeegee.
When the vehicle is ready for use in accor-
dance with requirements, it can be set into
operation simply and quickly by pressing
the PowerBoss button. When the Power-
Boss button has been pressed, the green
control lamp lights up.
