8
www.powerboss-equipment.com
4. Insert “L” bolt (
A
) through hole just above cleaning
tank on left side of handle (viewing from front of unit).
Hold bolt in place and attach a plastic knob (
B
) from
inside of unit. Tighten by hand.
5. Insert “L” bolt (
A
) through hole just above cleaning
tank on right side of handle (viewing from front of
unit). Hold bolt in place and attach plastic knob (
B
)
from inside of unit. Tighten by hand.
6. Insert “L” bolt (
A
) through hole on left side of base
(viewing from front of unit). Hold bolt in place and
attach a plastic knob (
B
) from inside of base. Tighten
by hand.
Attach Detergent Siphon Hose to Pump
Attach detergent siphon hose (
C
) to barbed hose fitting (
D
)
closest to high pressure outlet connection (
E
) on pump.
Add Engine Oil and Fuel
• Place pressure washer on a level surface.
NOTICE
Any attempt to crank or start the engine before it
has been properly filled with the recommended oil could
result in equipment failure.
• Refer to engine manual for oil and fuel fill information.
• Damage to equipment resulting from failure to follow this
instruction will void warranty.
• Refer to engine operator’s manual and follow oil and
fuel recommendations and instructions.
NOTICE
Check oil often during engine break–in. Refer to
engine operator’s manual for recommendations.
C
D
E
A
B
A
A
B
Not
for
Reproduction
