RTA AMPLIFER CONTROL PANEL LAYOUT
Fig.2
1. LOW INPUT (RCA) Jacks
These RCA style input jacks are for use with source units that have RCA line level inputs. A source unit with
a minimum output of 500mV is required for proper operation. However, this input can accept levels up to
4Vrms.
2. PHASE Switch
This switch will reverse the phase of the speaker output without having to touch any wiring. 0 is normal.
180 reverses the output. Select whichever setting provides the most bass.
3. HIGH INPUT
Use the High Input 4-pin Molex style jack when connecting to the speaker leads directly from a factory radio
without the use of a low level convertor. Be sure to observe the correct speaker polarity. (Do not use if you
are using the LOW INPUT from the RCA jacks).
7