PowerBass RTA-110 Application Manual Download Page 2

Thank you and Congratulations

Congratulations on your purchase of a PowerBass Autosound speaker system. You now own a 
speaker of uncompromising design and engineering from a factory that truly believes in the relent-
less pursuit of perfection.  Incorporating the highest quality parts and state-of-the-art materials, 
these speakers display the ultimate balance between high fidelity, performance and long-lasting 
reliability.

At PowerBass USA, Inc. we are confident you will have many years of outstanding enjoyment from 
this great SPEAKER investment. For maximum performance we recommend that you have your new 
PowerBass Autosound product installed by an Authorized PowerBass Autosound Dealer.

To learn more about PowerBass, please visit us on the World Wide Web at

http://www.powerbassusa.com

 Warning 

Continuous exposure to sound pressure levels in excess of 100 dB can cause permanent hearing loss. PowerBass Autosound 
Speakers are capable of producing sound pressure levels well over 170 dB. Please observe all local sound ordinances while 
listening to your PowerBass Autosound system. PowerBass USA, Inc. accepts no liability for hearing loss, bodily injury, or 
property damage due to the result of use or misuse of this product.

Summary of Contents for RTA-110





















Reviews: