5
1) The amplifier heatsink end (opposite the woofer and port tube end) should be facing into a
corner. See Fig 1.
2) Ideally there should be several inches clearance between the amplifier heatsink and the corner it
is backed up to. Make sure the open port beside the woofer is not obstructed.
3) When all connections are made the final step should be to secure the enclosure using the mount-
ing brackets provided so it remains securely in place.
WARNING:
Make sure where ever you choose to place the enclosure it’s a dry location on a solid
surface. Take care that none of the mounting screws will pierce any wiring harnesses, brake or fuel
lines, the vehicles fuel tank, spare tire or any other parts of the vehicle. Some or all of these may
be located behind or under the mounting surface.
Fig.1
amplifier side
woofer/port side
NOTE:
Do not obstruct the
port opening