POWERBASS AMPLIFIED BASS SYSTEM FEATURES
Built-in 150 Watt Amplifier:
Contains a high power Class A/B monaural amplifier complete
with chassis mounted adjustable Gain, Low Pass Filter and Bass Eq controls for sonic integration
into most existing factory or aftermarket car stereo systems and engineered perfectly to power the
subwoofer.
Remote Subwoofer Gain Control:
This wired remote functions as a Bass Boost and can
provide 0-18dB of gain at 45Hz. The remote will not increase the output beyond the GAIN
setting on the back of the amplifier. Supplied with XXft of cable it can reach your dash even when
the BTA-8 is mounted in the trunk.
Tunnel Port Design:
Large tunnel serves as a tuning port that “pushes” bass from the front
loaded woofer for maximum output using a small footprint enclosure.
Bass Reflex Single Port System:
For increased efficiency at low frequencies. The corner
loaded design works to produce a concentrated bass output which is amplified by firing into hard
surfaces giving the bass “kick” normally associated with much larger woofers.
Polypropylene Cone with Rubber Surround:
A thermoplastic polymer cone was selected to
help resist moisture and other elements while the rubber surround offers more excursion as well
as protection against deterioration than other materials.
BASV High Temperature Voice Coil:
These specially designed resin coated high temperature
voice coils measure a full 1.5-inches in diameter to ensure high power handling and precise
linear excursion while maximizing thermal heat dissipation.
Adjustable Mounting Straps:
Two adjustable mounting straps are supplied to anchor the
enclosure to your vehicle while allowing for easy removal if necessary.
Additional Features:
Carpeted enclosure, acoustically transparent speaker grill, professional
mounting hardware and wiring harness adds further value to your investment.
