ment. However, don’t be afraid to experiment with the placement as a little time and effort can have
a great effect on the amount of bass produced. Below are some placement suggestions:
1) The amplifier end (opposite the woofer and grill end) should be facing into a corner. See the
various configurations in Fig 1.
2) Ideally there should be several inches clearance between the amplifier and the corner it is point-
ing into. Make sure the open area (port) above the amplifier is not obstructed.
3) When all connections are made the final step should be to secure the enclosure using the mount-
ing straps provided so it remains in place.
WARNING:
Make sure where ever you choose to place the BTA-8 it’s a dry location on a solid
surface. Take care that none of the mounting screws will pierce any wiring harnesses, brake or fuel
lines, the vehicles fuel tank, spare tire or any other parts of the vehicle. Some or all of these may
be located behind or under the mounting surface.
NOTE:
Due to the shifting and jarring that will occur in a vehicle, the mounting straps may stretch
or loosen. It is recommended that you check the straps regularly to ensure the enclosure remains
mounted securely.
Fig.1
Hatchback or Pickup
Sedan
Behind seats
Trunk
woofer/grill side
amplifier side
