POWERBASS XTREME COMPONENT TWEETERS
These high quality tweeters come complete with several mounting housings for installation
versatility. After you have chosen the housing to be used, gently press the tweeter in the proper
mounting base. Once the tweeter base is mounted, push and “twist” the housing until it locks
to the base. On the following page are exploded views showing the possible types of tweeter
mounting.
After checking for clearance, cut the mounting hole in the door panel (see Tweeter Specifica-
tions for hole size). Mount the Flat Base from the outside with the mounting clip on the inside
of the door panel. Secure the mounting clip to the Flat Base with the long silver screw provided.
Surface/Angle Mounting (Type B and C)
If mounting the tweeter on the surface works out best, refer to the following drawing to see
how to best mount the tweeter. Black sheet metal screws have been provided to attach the
surface base to the door panel.
Flush Mounting (Type A)
The best location for the tweeter is usually high up on the door and as far forward as possible
without interference from the dashboard. If the desired location is flat and space behind the door
panel allows the use of the flush mount housing, follow the drawing as shown below:
