SPECIFICATION FOR POWERBASS 2XL SPEAKERS
(due to Constant Improvement, Specification and Parameter are subject to change without notice)
Model
Size
Nominal Impedance
Frequency Response
Sensitivity
1W/1M
Magnet Size
Mounting Depth
Power
RMS/Max
3XL-50C
5.25”
3 Ohm
58 Hz - 21 kHz
88 dB
Neo
2.8”
70 W / 140 W
3XL-60C
6.5”
3 Ohm
55 Hz - 21 kHz
90 dB
Neo
3.0”
90 W / 180 W
INSTALLATION EXPERIENCE
Installation of PowerBass Xtreme Speakers requires experience with a variety of mechanical and
electrical procedures. This manual provides only general installation and operation instructions.
If you have any reservations about your installation skills or lack of the proper tools, please
contact your local PowerBass Xtreme dealer for assistance.
TIPS TO GET THE MOST OUT OF YOUR POWERBASS SYSTEM
Your PowerBass Xtreme speakers have been meticulous engineered and designed to handle high
power musical reproduction. Despite their rugged construction, it is possible to damage your
speaker if they are improperly used. In general, you will hear distortion as a so-called warning
before any damage occurs. If you hear distortion in your system, immediately reduce the musi-
cal level to the point where the sound retains its clarity.
1. Be sure you supply the speakers with enough unclipped amplifier power to drive them
properly.
(More damage can be done to a speaker by under-powering and clipping your
amplifier than any other way!)
