background image

POWERBASS XTREME LIMITED WARRANTY POLICY

PowerBass USA, Inc. offers limited warranty on PowerBass products under normal use on the fol-
lowing terms:

PowerBass Xtreme Speakers are to be free of defects in material and workmanship for a period 
of one (1) year.  The warranty is extended to three (3) years for parts and labor, if an Authorized 
PowerBass Xtreme Dealer completes the installation.

This  warranty  applies  only  to  PowerBass  products  sold  to  consumers  by  Authorized  PowerBass 
Dealers in the United States of America.  Products purchased by consumers from a PowerBass deal-
er in another country are covered only by that country’s Distributor and not by PowerBass USA.

This warranty covers only the original purchaser of PowerBass product.  In order to receive service, 
the purchaser must provide PowerBass with the receipt stating the consumer name, dealer, product 
and date of purchase.

Products found to be defective during the warranty period will be repaired or replaced (with a product 
deemed to be equivalent) at PowerBass’s discretion and will not be liable for incidental or conse-
quential damages. PowerBass will not warranty this product under the following situations:
 

• Speakers received with bent frames or water damage

 

• Abuse such as holes in the cone, surround or ripped spider

 

• Voice coil damage due to amplifier clipping or distortion

 

• Product that has not been installed according to this owners manual

Any  implied  warranties  including  warranties  of  fitness  for  use  and  merchantability  are  limited  in 
duration to the period of the express warranty set forth above.  Some states do not allow limitations 
on the length of an implied warranty, so this limitation may not apply.  No person is authorized to 
assume for PowerBass any other liability in connection with the sale of this product.

Please call (909) 993-5399 for PowerBass Customer Service.

  You must obtain an RA# (Return 

Authorization Number) to return any product to PowerBass. 

The RA number must be prominently 

marked on the outside of the shipping carton or the delivery will be refused.

  Please pack your 

return carefully; we are not responsible for items damaged in shipping.  Return the defective product 
along with a copy of the original dated retail sales receipt, plus $9.00 for handling and diagnostic 
evaluation to:

PowerBass USA, Inc., Attn: Returns (RA#__________)
13936 Mountain Avenue, Chino, CA  91710

Residents of HI, AK and US territories will be charged for return shipping.  All inquires regarding 
service and warranty should be sent to the above address.

Summary of Contents for 3XL-50C

















Reviews: