6
7
8
9
- 8 -
INTENDED USE
FITTING UNIGRIP & BATTERY
Rails
Battery Sold Separately
Trigger - Press
UniGrip
Sold Separately
Release Slider
f- Slide back
(both sides)
Direction/
Safety
ty Swich
- Press
(either side)
Read and understand all safety warnings and
all instructions before operating this product.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Sharp blades, heat buildup,
harmful dust and flying debris are a
danger to user and bystanders.
Use of suitable protective clothing,
gloves,
footwear, lung, eye and ear
protection as well as safe working
practices can reduce these risks.
With an appropriate attachment fitted in the chuck this
tool is intended for drilling in wood, metal, ceramics
and plastic. It is also used for driving screws and
fixings. The HD05 version is also suitable for hammer
drilling in concrete, bricks and masonry when the
hammer function is enabled.
Inserting the UniGrip
NOTE!
Remove any debris from the area that joins the
UniGrip to the tool. Damage to contacts or mechanical
controls could occur if debris is caught between them.
Align the rails on the tool so they will slide smoothly into
the rails on the UniGrip. Once Aligned, slide the two
parts together firmly until there is a “click” as the locking
catch engages. Test the catch is secure and the electrical
contacts are engaged by selecting a direction and briefly
pressing the trigger.
Removing the UniGrip
Slide the two UniGrip Release slider to the rear of the
handle and slide the UniGrip out of the tool from the rear.
READ ALL
INSTRUCTIONS
whenever the tool is not in immediate use the direction
switch must be in its central locked position to prevent
accidental starting. Ensure the tool will not be accidentally
started by pressing the trigger.
WARNING!
When changing battery, bit or
