2
• Squeeze the tabs on the motor
harness connector to unplug it
from the battery connector.
• Squeeze the tabs on the charger
connector to plug it into the
battery connector
.
• Plug the charger into a standard
120 volt wall outlet
.
Note:
If power to the outlet is
controlled by a wall switch, make
sure the switch is “ON”.
• Charge the battery a minimum
of 18 hours. Never charge the
battery longer than 30 hours.
Overcharging or undercharging
the battery may shorten battery
life and decrease vehicle running
time.
• Once the battery is charged,
reconnect the battery connector
and motor harness connector
and lower the seat.
Note:
Remember to lock the lock
fastener to prevent children from
accessing the batteries.
11
2
11
1
3
Charging the Battery
®
IMPO
RTA
NT
A 25
AMP
FUS
E MU
ST
BE IN
STAL
LED I
N TO
P
OF B
ATTE
RY B
EFO
RE
TOY
WIL
L RE
CHA
RGE
OR O
PER
ATE
®
• Rotate the lock fastener on the
seat back
1
/
4
turn using a slotted
screwdriver to unlock the battery
compartment.
• Lift the seat to access the
battery.
• Use pliers to remove the fuse
from the battery.
• Visually examine the fuse to
make sure it is not blown. If the
fuse has blown, replace it with a
new Power Wheels
®
25 amp fuse.
• Reinsert the fuse into the battery
before charging. The battery will
not charge if a 25 amp fuse in
good condition is not inserted
into the battery.
1
GOOD FUSE
"BLOWN" FUSE
Motor Harness Connector
Battery Connector
®
Important Note:
The battery must be upright while charging. You do not have to
remove the battery from the vehicle to charge it.
11
1
11
2
25
Battery Connector
Charger
Connector
