Istruzioni per l’uso e manutenzione
Cod. OQ7.5ARG114 – GB
Emiss. 19-01-11 Rev. 0 - Agg. /
27
POWER SYSTEM SRL
Via dell’Emigrante, 11/13 - 36040 Brendola (VI) Italia
15
DIRECTIVES AND REFERENCE NORMS
The compressor has been designed and made considering the assessments emerging from an accurate analysis of risks and aiming to
achieve, considering the present state of the art, the objectives established by the essential safety and health requirements contemplated
by the European Directives.
TAB. 5
lists the European Directives and Norms (EN) to which reference has been made.
REFERENCE
DESCRIPTION
2006/42/EC
“Of the European Parliament and of the Council, of 17 May 2006, concerning
machinery and amending directive 95/16CE”.
2006/95/EC
“Low Voltage Directive - Of the European Parliament and of the Council of 12
December 2006 on the harmonisation of the laws of Member States relating to
Electrical Equipment designed for use within certain voltage limits”.
2004/108/EC
“Electromagnetic Compatibility Directive - Of the Council, of 15 December 2004,
on the approximation of the laws of the Member States relating to Electromagnetic
Compatibility and repealing Directive 89/336/EC”.
2009/105/CE
“Pressure Equipment Directive” 2009/105/EC - Of the European Parliament and of
the Council of 16 September 2009 relating to simple pressure vessels”
EN 1012-1 : 1997
“Compressors and vacuum pumps. Safety requirements. Compressors”.
EN 60204-1 : 2006
“Fundamental safety standards on the Electrical equipment of machines”.
TAB.5
16
SAFETY
IT IS FORBIDDEN TO TAMPER WITH, EXCLUDE, REMOVE AND/OR REPLACE ANY
SAFETY DEVICE PRESENT IN THE COMPRESSOR
.
IT IS OBLIGATORY TO REQUEST THE INTERVENTION OF THE TECHNICAL ASSISTANCE OF
THE MANUFACTURER OR THE AUTHORISED DEALER FOR THE REPLACEMENT OF ANY
SAFETY DEVICE.
16.1 SAFETY
SIGNALS
The signals are composed of yellow adhesive labels with black pictograms, applied on the front and rear of the compressor
(see FIG.
8)
. The meaning of each signal is explained in
TAB. 6.
IT IS OBLIGATORY TO KEEP THE SAFETY SIGNALS CLEAN TO ENSURE GOOD VISIBILITY.
IT IS ABSOLUTELY FORBIDDEN TO REMOVE AND/OR DAMAGE THE SAFETY SIGNALS APPLIED
BY THE MANUFACTURER.
IT IS OBLIGATORY TO REPLACE ANY DAMAGED SAFETY SIGNALS, ASKING THE
MANUFACTURER TO SUPPLY REPLACEMENTS.
