Power Storage Solutions 12MQ100 - 620, Installation & Operation Manual

Page: 3 / 22

Power Storage Solutions sealed lead acid battery is shipped
charged, handle the battery according to the following
instructions before use:
1. Introduction
Power Storage Solutions pr ivate label batteries technology is based on years of research and
development. Our products are manufactured under the guidelines of ISO9001 quality system. Each
battery undergoes a series of strict manufacturing and quality control processes before shipment.
We are committed to provide our customers
ba tteries that provide reliable DC power and are
solutions to their critical power problems .
2. Safety precaution and protection equipment
When working any battery system, be sure you have the necessary tools and safety equipment,
including but not limited to:
a) Insulated tools
b) Rubber apron and gloves
c) Face protection/face shield
d) Safety goggles
e) Fire extinguisher
f) Emergency eye wash and shower, if available
g) Acid spill cleanup kit
Pay attention to the electrical warning symbols to avoid serious injury or death caused by
electrical shock or burns.
Remove all rings and jewelry while working on batteries.
Multi-cell battery systems can attain high voltage and/or currents. Do NOT touch un-insulated
batteries, connectors or terminals. To prevent serious electrical burns and shock, use EXTREME
CAUTION when working with DC Battery system
Always wear safety protection clothes and protect all exposed skin and eye surfaces
Use non-conductive or insulated tools when working with ANY battery system.
All tools should be adequately insulated with the use of suitable no-conducting
material to minimize the possibility of shorting across connections.
Never lay tools or other conductive objects on the battery.
Avoid shorting of batteries and connections to prevent explosions , arc flash and personal injury.
Dispose of batteries or battery components via licensed EPA approved recycling facilities .
pg.3