background image

2

English

IMPORTANT SAFETY INSTRUCTIONS

READ AND UNDERSTAND ALL WARNINGS, CAUTIONS AND OPERATING INSTRUCTIONS 
BEFORE USING THIS PRODUCT. Failure to follow all instructions listed below may result in 
electric shock, fire and/or serious personal injury.

 

CAUTION:

 

RISK OF ELECTRIC SHOCK, Do not use with extension cord near 

water or where water may accumulate. Keep work light at least 16 feet from pools and spas. 
Keep plugs and receptacles dry. Use only three-wire outdoor extension cords with grounded 
plugs and grounded receptacles.

 WARNING:

 

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR 

PERSONAL INJURY

• 

Ground Fault Circuit Interrupter (GFCI) protection should be provided

 on the circuit(s) 

or outlet(s) to be used for the work lights in wet location. Receptacles are available having the built-in GFCI 
protection and are able to be used for this measure of safety.

• 

Use only with an extension cord for outdoor use,

 such as an extension cord of cord type: SW, SW-A, 

SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A, SJOW, SJOW-A, SJTW, SJTW-A, or SJTOW, SJTOW-A.

• 

Do not look directly at the lighted lamps to avoid eye injuries.

• 

Always keep the work light away from any flammable surface or materials.

 

• 

Always check for damaged or worn-out parts before using the work light. 

Broken parts will 

affect the operation of the work light. Replace or repair damaged or worn parts immediately. If repairs are needed, 
consult a professional electrician.

• 

Do not use a pressure washer to clean this product.

• 

Do not modify the work light in any way. 

Unauthorized modification may impair the function and/

or safety and could affect the life of the product. There are specific applications for which the work light was 
designed. 

• 

Store the work light in a secure place out of the reach of children.

 Inspect it for good working 

condition prior to storage and before re-use. 

SAVE THESE INSTRUCTIONS

SPECIFICATIONS

 Model .................................  PWLD300T
 Rated Power ....................... 120V~/60Hz, 270W
 Brightness ..........................  7500 / 15,000 / 22,500 / 30,000 Lumens
 Color Temperature ..............  5000K Bright White
 CRI ...................................... >80
 Cord .................................... 10 ft. 18/3 SJTW
 Tripod Height ....................... 29" - 70”
 Net Weight .......................... 20 lb.

Summary of Contents for PWLD300T

















Reviews: