background image

4

INTRODUCTION

Thank You for Purchasing a PowerSmart

®

Product. This manual provides information regarding the safe

operation and maintenance of this product. Every effort has been made to ensure the accuracy of the
information in this manual. PowerSmart

®

reserves the right to change this product and specifications at

any time without prior notice.

Please keep this manual available to all users during the entire life of the power tool.

This manual contains special messages to bring attention to potential safety concerns, power
tool damage as well as helpful operating and servicing information. Please read all the
information carefully to avoid injury and machine damage.

QUESTIONS? PROBLEMS?

Please contact our Customer Service Dept. with any questions and/or comments, either by Email:
[email protected], or Toll Free at (800)791-9458. We are available Mon-Fri 9am-5pm EST to
help solve any issues that you might encounter.

SAFETY INFORMATION

Before operating this power tool, read and observe all warnings, cautions, and instructions on the power
tool and in this Owner’s Manual.

NOTE: The following safety information is not meant to cover all possible conditions and situations that
may occur. Read the entire Owner’s Manual for safety and operating instructions. Failure to follow
instructions and safety information could result in serious injury or death.

This safety alert symbol is used to identify safety information about hazards that can result in personal
injury.

A signal word (DANGER, WARNING, or CAUTION) is used with the alert symbol to
indicate the likelihood and the potential severity of injury. In addition, a hazard symbol may
be used to represent the type of hazard.

DANGER

Indicates a hazard, which, if not avoided, will result in death or serious injury.

WARNING

Indicates a hazard, which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a hazard, which, if not avoided, might result in minor or moderate injury.

CAUTION

Without the alert symbol, indicates a situation that could result in damage.

Summary of Contents for 76604L






















Reviews: