Your wheels are made of injection molded nylon and will not rust. They are also
fitted with sealed precision bearings (7) which require no lubrication. However they may need
occasional adjustments, due to wear under normal use. Too much side play or looseness or
squeaking from your wheel means it needs to be checked. In most cases, tightening of the axle
bolt (2) will rectify this condition. Should squeaking of looseness continue to exist after
adjustment, the bearings might have to be changed. See your servicing dealer for assistance.
To Adjust:
Remove hub cap (6) to access the axle bolt (2), then simply loosen and remove the
axle bolt (2). This allows you to remove the rear wheel. To adjust your seat height, the axle re-
ceiver (3) and the axle receiver nut (5) needs to be loosen and removed. Once you select your
desired seat height, place the axle receiver (3) and the receiver nut (5) in the corresponding
position on the axle plate (4). Tighten the axle receiver (3) and axle receiver nut (5) securely
back on the axle plate (4). Place the axle bolt (2) through the rear wheel and tighten back to
the axle receiver (3). Then place the hub cap (6) on to protect the axle bolt (2).
TO ADJUST REAR WHEELS:
number
Description
Quantity
1
Wheel
2
2
Axle Bolt
2
3
Axle Receiver
2
4
Axle Plate
2
5
Axle Receiver Nut
2
6
Hub Cap
2
7
Precision Bearing
4
1
7
2
6
7
5
4
3
11
PoWer Plus MobIlITy Inc. rev.2
Power Plus Mobility inc.
rear wheels
