Power Plus Mobility EXTREME, Owner'S Manual

Page: 11 / 20

Your leg rest is designed to be removed and replaced the same as your foot rest. However, it is
advisable to remove and replace your leg rest while it is in a down position. Lifting on the
foot-plate raises the leg rest and it will automatically lock at the raised position.
Locate 1 into 3 and swing into place. This should allow 4 to lock into place with 3. (Make sure
your leg rest is locked into place before using. To remove foot rest, pull release handle 4, swing
leg rest sideways and lift leg rest upwards. To raise leg rest move lever 5 and lift leg rest. To
lower leg rest, pull 5 till lowered. To adjust leg length height, remove screw 8 and adjust to
required height.
*For low floor to seat height on chair, shorter leg rest height
extension tube is required.
1
2
3
4
5 6
7
8
OPERATING YOUR Leg rest:
number Description Quantity
1 Locator Pin 1
2 Front Post 1
3 Locking Pins 1
4 Release Handle 1
5 Elevating Trigger 1
6 Calf Pad Height Adjustment 1
7 Leg Rest Height Extension Tube 1
8 Socket Cap Screw 1
8
PoWerPlusMobIlITy.coM
Power Plus Mobility inc.
elevatinG leG rest