The foot rest on your chair is designed to swing away and removes easily. To swing away,
remove feet from the footplate (1) and fold foot-plates up. Then push the release handle (2) on
the foot rest locking mechanism. It will swing to the side of your chair, and could then be
removed by lifting it straight up and off the locating pins (3). To replace hold foot rest at the
side of your chair, locate onto mounting pins, allowing it to drop all the way in, and then push
forward until it locks into place.
1
2
3
4
Your leg rest is designed to be removed and replaced the same as your foot rest. However, it is
advisable to remove and replace your leg rest while it is in a down position. Lifting on the
foot-plate raises the leg rest and it will automatically lock at the raised position.
Locate 1 into 3 and swing into place. This should allow 4 to lock into place with 3. (Make sure
your leg rest is locked into place before using. To remove foot rest, pull release handle 4, swing
leg rest sideways and lift leg rest upwards. To raise leg rest move lever 5 and lift leg rest. To
lower leg rest, pull 5 till lowered. To adjust leg length height, remove screw 8 and adjust to
required height.
*For low floor to seat height on chair, shorter leg rest height
extension tube is required.
number
Description
Quantity
1
Foot Plate
2
2
Releasing Handle
2
3
Mounting Pins
4
4
Foot rest Extension Tube
2
7
PoWer Plus MobIlITy Inc. rev.2
Power Plus Mobility inc.
foot rest
