9004409
Heavy Duty Angle Grinder Stand
V1.0
8
For technical questions call 1-800-665-8685
1.
Follow operation steps to set-up the grinder and workpiece. Make sure
the grinder assembly will smoothly move back and forth.
2. Conduct a dry run to make sure you will be able to cut the full width as
desired.
3.
Start the grinder. Pull it down and cut into the workpiece until you
reach the desired depth.
4.
Push the grinder away from you slowly until the cut is complete. Don’t
force the tool.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient, easier
to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Only use accessories intended for use with this tool.
5.
Keep the tool clean, dry and free from oil/grease at all times.
6.
Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or
others.
CLEANING
Consult the grinder cleaning instructions. Clean the base with compressed
air, a brush or a rag. Follow all safety measures when using compressed air.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualified technician
service the tool.
See the angle grinder’s manual for troubleshooting grinder problems.
