Power Fist 8986739 Manual Download Page 4

 WARNING!

This notice indicates a specific hazard or unsafe practice that could result in a
serious injury if the proper precautions are not taken.

 CAUTION!

This notice indicates a potentially hazardous situation that may result in minor
or moderate injury if proper practices are not taken.

 NOTICE!

This notice indicates that a specific hazard or unsafe practice will result in
equipment or property damage, but not personal injury.

WORK AREA

1.

Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.

2.

Keep anyone not wearing the appropriate safety equipment away from
the work area.

3.

Store unused tools properly in a dry, safe and secure location to prevent
rust, damage or misuse.

4.

Do not install or use in the presence of flammable gases, dust or liquids.

PERSONAL SAFETY

WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).

PERSONAL PROTECTIVE EQUIPMENT

WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
1.

Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.

2.

Wear protective clothing designed for the work environment and tool.

PERSONAL PRECAUTIONS

Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.

Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.

2.

Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.

8986739

STEEL RETRACTABLE EXTENSION CORD REEL

V1.0

www.princessauto.com / 1-800-665-8685

Page 4

Summary of Contents for 8986739





























Reviews: