background image

8882524 

10 x 20 ft Heavy Duty PE Carport 

V4.0 

For technical questions call 1-800-665-8685 

 

SAFETY 

WARNING! Use caution during installation. The user assumes all risk of 

injury during set up and use. Please follow the safety precautions listed 
below to avoid injury. 

1.  Never set up or continue to use product in rainy, windy or stormy 

conditions, especially lightning storms. Please remove your canopy top 

before a storm. 

2.  Keep your canopy off steep slopes and inclines. 
3.  Have at least two adults during installation. Read all instructions carefully 

and following accordingly. Failure to do so may result in injury or damage 

to the canopy. 

4.  Always inspect the canopy and each part before use. Make sure that 

everything is tightly secured. Replace any worn, defective or missing parts. 

5.  After installation, the canopy should be anchored to prevent damage and 

possible injury. It is the user’s responsibility to properly anchor the 

product. 

6.  Do not set up or use the product in close distance to fire or any heat 

source. Do not use a barbecue grill under the canopy. 

7.  Do not use the canopy as a permanent shelter. It is designed for temporary 

use only. 

8.  Do not bleach canopy cover. Dry clean or wash canopy cover in a washing 

machine. 

 

 

10 x 20 ft Heavy Duty 

PE Carport 

Summary of Contents for 8882524













Reviews: