Visit www.princessauto.com for more information
3
8555724
V 4.0
Lever Action Drum Pump
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or
American National Standards Institute (ANSI) when using the tool.
1. Dress properly, wear protective equipment. Use breathing, ear, eye, face, foot, hand and
head protection. Always wear ANSI approved impact safety goggles, which must provide
both frontal and side protection. Protect your hands with suitable gloves. Protect your head
from falling objects by wearing a hard hat. Wear an ANSI approved dust mask or respirator
when working around chemical dusts and mists. Wear ANSI approved earplugs. Protective,
electrically non-conductive clothes and non-skid footwear are recommended when working.
Wear steel-toed boots to prevent injury from falling objects.
2. Control the tool, personal movement and the work environment to avoid personal injury or
damage to the tool. Stay alert, watch what you are doing and use your common sense.
a. Keep articles of clothing, jewelry, hair, etc., away from moving parts to avoid
entanglement with a tool.
b. Do not operate any machine / tool when tired or under the influence of drugs, alcohol
or medications.
c. Do not overreach when operating a tool. Proper footing and balance enables better
control of a tool in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
1. Contact your chemical or fluid supplier to check for compatibility with the pump prior to
installation and operation.
2. Prior to use, always carefully and thoroughly read and understand the OSHA information
contained in the Material Safety Data Sheet (MSDS) supplied for the chemical that is to
be pumped.
3. Wear protective clothing (goggles, face masks, long sleeves, long pants, gloves, aprons, etc.)
as set forth in the OSHA Material Safety Data Sheet when pumping any hazardous chemicals.
4. When using flammable liquids, pump containers should be grounded to avoid
static electricity.
5. Any pump used for transferring flammable liquids must be stored in a ventilated area
after use.
6. The pump should be washed out before it is used because processing lubricants may
contaminate the fluids.
7. Prior to use, inspect your pump thoroughly verifying its proper assembly.
8. If the pump is removed from the drum, it should be thoroughly rinsed in a liquid that is
compatible with both the pump and fluid.
UNPACKING
1. Carefully remove the tool from the package.
a. Retain packing material until you have carefully inspected and satisfactorily installed or
operated the tool.
2. Make sure that all items in the parts list are included.
3. Inspect the parts carefully to make sure the tool was not damaged while shipping.
