V4.1
2 in. Gas Water Pump
8509978
Visit www.princessauto.com for more information
9
1. Hose Coupler – A barbed hose coupler is placed over the inlet or discharge
port (Fig. 2-4) and fixed into place by a hose ring (Fig. 2-3) that screws
into place. A hose end is then
fitted over the barbed coupler
(Fig. 2-1) and fixed into place
using hose clamps (Fig. 2-2).
Tighten hose clamp securely
using a standard 1/4 in. (6 mm)
screwdriver. Rubber seals are
required.
2. Threaded Connection – The
intake and discharge ports have
male threads. Commercial hoses
will have a compatible female
thread. A rubber seal will be
required to prevent leaks.
3. Cam-lock Adapter – An adapter is
fitted to the pump’s intake or
discharge port (Fig.3-1). The
hose has the complementary
adapter with two cam-lock levers
(Fig. 3-2). The hose adapter is
fitted over the pump adapter and
the cam-lock levers (Fig. 3-3) are pushed down to lock the adapters
together.
SUCTION HOSE SETUP
1. Connect a non-collapsible
suction hose to the pump’s
inlet. This hose should be no
longer than 26 feet long.
2. Attach the strainer basket to
the other end of the suction hose by inserting the adapter to the hose end.
3. Fix with a hose clamp.
Fig. 2
Fig. 3
Fig. 4
