8509978
2 in. Gas Water Pump
V4.1
16
For technical questions call 1-800-665-8685
OIL LEVEL CHECK
1. Remove the dipstick and clean it.
2. Reinsert the dipstick into the oil filling hole without screwing it in, remove
the dipstick and check the oil level.
3. No oil on the dipstick indicates the oil level is too low. Add the recommended
engine oil up to the oil filling neck.
4. Reinstall the dipstick.
DRAIN AND FLUSH WATER PUMP
1. Disconnect and drain the suction and discharge hoses.
2. Remove the drain plug at pump’s bottom (Fig. 14).
3. Remove the primer plug from top of pump and flush the pump’s internal
components with clean water (Fig. 15).
4. Replace both plugs and finger tighten.
HOW TO ADD FUEL
DANGER! Fuel is very flammable. Use extreme care when handling or storing
fuel. An ignition source contacting the fumes or fuel may result in a fire or
explosion and cause fatal or serious injuries to you or a bystander.
1. Refuel outdoors or in a well-ventilated area and immediately wipe up spills.
Fuel can damage paint and plastic.
Fig. 14
Fig. 15
Fig. 13
