14.4V Cordless Grease Gun
Visit www.princessauto.com for more information
5
8505547
V 3.03
NOTE:
Before using your tool for the first time, discharge the battery and then charge the battery
pack completely.
WARNING! Never burn batteries, as they can explode in a fire. Do not charge leaking batteries.
Only a qualified service technician should perform maintenance on the battery pack. Contact local
solid waste authorities for instructions on correct disposal or recycling of the battery pack.
TOOL USE AND CARE
WARNING! Do not use the tool if the trigger does not function properly. Any tool that cannot be
controlled with the ON / OFF switch is dangerous and must be repaired.
1. Use the correct tool for the job. Maximize tool performance and safety by using the tool for
its intended task.
2. Do not modify this tool or use for a purpose for which it was not designed.
3. This tool was designed for a specific function.
Do Not:
a. Modify or alter the tool; all parts and accessories are designed with built-it safety
features that may be compromised if altered.
b. Use the tool in a way for which it was not designed.
UNPACKING
1. Carefully remove the tool from the package.
2. Retain packing material until you have carefully inspected and satisfactorily installed or
operated the tool.
3. Inspect the parts carefully to make sure the tool was not damaged while shipping.
OPERATION
CHARGER OPERATION
1. Insert the battery pack into the charging socket of the charger. Then, plug the charger
into the nearest grounded, electrical outlet. To start charging, press the SET button on the
charger. The battery is charging when the green light is illuminated and the red light
goes out.
NOTE:
Make sure the power circuit voltage is the same as that shown on the charger
specifications plate.
2. Before using the grease gun for the first time, be sure to discharge the new battery before
charging. All new rechargeable batteries come with 80% charge from the factory. If the
battery pack is installed in the gun, remove it by depressing the two battery release buttons
(one button on each side of the battery pack) and pull the battery pack out of the gun.
3. As a battery pack approaches the discharged state, you will notice a sharp drop in tool
performance. When the tool is unable to perform the task at hand, it is time to recharge the
battery pack. Recharging the battery pack before this condition is reached will reduce the
total work life of the pack. Discharging the pack beyond this point can damage the pack.