1.6 GPM @ 1,740 PSI Electric Pressure Washer
9
Visit www.princessauto.com for more information
8458804
V 3.0
Problem(s)
Possible cause(s)
Suggested solution(s)
Spray wand or extension
or nozzle leaks
Spray wand not properly attached
Remove spray wand and reattach according to
Assembly instructions
Broken o-ring or plastic insert
Bring to Princess Auto Ltd. or a
qualified technician
Pump makes
excessive noise
Pump is sucking air
Ensure hose and fittings are airtight. Turn off
unit and purge pump by squeezing trigger until
a steady flow of water emerges through
the nozzle.
Water leaks from pump
(up to 3 drops per minute
is normal)
Loose fittings
Tighten fittings
Water seals are damaged or worn
Bring to Princess Auto Ltd. or a
qualified technician
Oil drip
Oil seals are damaged or worn
Bring to Princess Auto Ltd. or a
qualified technician
Motor buzzes but
fails to run
Supply voltage below minimum
Verify that only the pressure washer is running
on this circuit
System has residual pressure
Turn unit off, squeeze trigger on spray wand to
release pressure, then turn unit on
Voltage loss due to extension cord Do not use extension cord with this unit. Plug
directly into power outlet.
Pressure washer not used
for long periods
Bring to Princess Auto Ltd. or a
qualified technician
