3
For technical questions call: 1-800-665-8685
8392128
1.5 Ton
Aluminum Jack
V 2.0
SPECIFICATIONS
Max. Lift Capacity
3,000 lb
Lifting range
4.9 to 13.4 in.
INTRODUCTION
This jack features a 3,000 lb maximum capacity. Lifting range for this jack is 4.92 to 13.39 in. Jack features an
overload valve which helps prevent equipment failure. Bypass system provides safe operation. Compact design
allows use in confined spaces.
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. Keep this manual for the safety warnings
and precautions, operating, inspection and maintenance instructions. When using this tool, basic precautions
should always be followed to reduce the risk of personal injury and/or damage to the equipment. Note that when
this manual refers to a part number, it refers to the parts list included. Before allowing someone else to use this
tool, make sure they are aware of all safety information.
SAFETY INSTRUCTIONS
1. Read Operating Instructions. Study, understand and follow all instructions in this manual before operating
the jack. Failure to heed these warnings may result in loss of load, damage to the jack and/or jack failure
resulting in personal injury or property damage.
2. Position the Jack. Position the jack to only lift on the areas of the vehicle specified by the
vehicle manufacturer.
3. Use Support Stands. After lifting the vehicle always support the load with appropriately rated vehicle
supports stands before working on the vehicle.
4. Do Not Overload Jack. Do not overload this jack beyond its rated capacity. Overloading this jack beyond its
rated capacity can cause damage to or failure of the jack.
5. Use on Hard Level Surface. This jack is designed only for use on hard level surfaces capable of sustaining
the load. Use on other than hard level surfaces can result in jack instability and possible loss of load.
6. Center Load on Jack Saddle. Center load on jack saddle before lifting vehicle. Off-center loads and loads
lifted when the jack is not level can cause loss of load or damage to the jack.
WARNING! KEEP HANDS AND FEET CLEAR OF THE JACK HINGE MECHANISM AND GROUND CONTACT AREA
WHEN LOWERING THE LOAD!
