Technical Specifications
• Model: 8032693
• Voltage: 18 VDC
• Fits drill bit diameters: 1.5 mm to 10 mm
• 1 to 1-1/2 hours charge time
Safety Instructions
Caution: When using power tools, attention must be paid to the
following basic safety measures as protection against electric shock,
risk of injury and burns. Read and observe these instruction before
use of the tool.
1. Keep the work area tidy. Disorder in the work area increases the
risk of accidents.
2. Work in a safe environment. Never expose power tools to rain or
moisture and do not use power tools in a moist or wet
environment. Ensure that there is ample light. Do not use power
tools in the vicinity of combustible liquids or gases.
3. Protect yourself from electric shock. Avoid bodily contact with
grounded parts such as pipes, radiators and stoves.
4. Keep power tools away from children. Do not permit others to
touch the tool or the cable, and keep visitors out of the working
area.
5. Store tools in a safe place. Unused tools should be stored in a dry,
locked room out of reach of children.
6. Do not overload the tool. Equipment will work better and more
safely in the specified performance range.
7. Use the correct tool. Do not use tools or attachments that are too
weak for the task required. Do not use tools for a purpose for
which they are not intended.
8. Dress appropriately. Avoid loose clothing or jewelry that could get
caught in moving parts. Tie back long hair. Rubber gloves and non-
slip footwear are recommended for outdoor work.
9. Use safety glasses. A respirator or dust mask should be worn for
any work that generates dust.
10. Secure the workpiece. Use clamps or a vice in order to hold the
workpiece in a secure position. It is safer than using the hands,
and allows both hands to remain free to operate the tool.
