8006581
V 1.45
99
For any technical questions, please call 1-800-665-8685
TROUBLE SHOOTING
Problem(s)
Possible Cause(s)
Suggested Solution(s)
Air escaping from port on regulator
cap.
Broken or damaged diagphram in
regulator.
Replace regulator.
Pressure dropping slowly on gauge.
Dirty or worn valve seat in regulator.
Replace regulator.
Fluid or air leak at lid gasket.
Defective lid gasket.
Replace lid gasket.
Thumb screw not tight.
Tighten thumb screws.
Paint in tank tends to settle rapidly.
Paint not mixed or thinned properly.
Mix or thin paint according to
instructions on paint.
Gauge not registering air pressure.
Defective air gauge.
Replace air gauge.
Safety valve popping off.
Tank pressure too high.
Reduce tank pressure to between 20
and 50 PSI.
Defective safety valve.
Replace safety valve.
