Power Electronics ProfiPower SD700 Type 1, Manual

Page: 36 / 45

SD700
–
PROFIBUS POWER ELECTRONICS
34
TRIAL RUN
4.3.4. Profipower SD700 Type 4 Module
This is also a pre-defined module, although broader than the
previous one. A high number of Modbus registers for reading and
writing has been defined. User only must write the value of the
registers.
Pre-defined registers for these modules are shown in the attached
table.
The Profibus board receives 54 bytes of output data of the Profibus-
DP Master.
Output
Data
(Word)
Param.
Modbus
Address
Variables Range Modbus Range
0 G3.3 40124 LOCAL_SPEED_REF -250 to +250% -20480 to + 20480
1 - 40562 HOST_START_CONTROL 0 to 1 0 to 1
2 - 40563 HOST_STOP_CONTROL 0 to 1 0 to 1
3 - 40564 HOST_RESET_CONTROL 0 to 1 0 to 1
4 - 40565 HOST_TRIP_CONTROL 0 to 1 0 to 1
5 G10.1 40102 LIMIT1_MIN_SPEED -250 to Max Speed 1 -20480 to G10.2
6 G10.3 40103 LIMIT2_MIN_SPEED -250 to Max Speed 2 -20480 to G10.4
7 G10.2 40104 LIMIT1_MAX_SPEED Min. Speed 1 to +250% G10.1 to 20480
8 G10.4 40105 LIMIT2_MAX_SPEED Min. Speed 2 to +250% G10.3 to 20480
9 G10.5 40106 CURRENT_LIMIT 0.25 to 1.50In, OFF 2048 to 12291
10 G10.9 40107 TORQUE_LIMIT 0% to +250% 0 to +20480
11 G10.11 40108 INVERTED_SPEED_ENABLED Y/N 0 to 1
12 G2.1 40282 NAMEPLATE_MOTOR_CURRENT 1 to 9999A 1638 to 12288
13 G2.3 40285 NAMEPLATE_MOTOR_POWER 0 to 6500kW 0 to 65000
14 G5.1 40392 ACCELERATION_RATE 0.01 to 650% / sec 1 to 65000
15 G5.3 40393 ALT_ACCELERATION_RATE 0.01 to 650% / sec 1 to 65000
16 G5.2 40394 DECELERATION_RATE 0.01 to 650% / sec 1 to 65000
17 G5.4 40395 ALT_DECELERATION_RATE 0.01 to 650% / sec 1 to 65000
18 G5.5 40396 ACC_BRAKE_SPEED OFF; 0 to 250% 0 to 20480
19 G5.6 40397 DEC_BRAKE_SPEED OFF; 0 to 250% 0 to 20480
20 G10.6 40453 CURRENT_LIMIT_TIMEOUT 0 to 60s, OFF 0 to 600; 610
21 G11.2 40454 STOP_TIMEOUT OFF=0.0 to 999s 0 to 9999
22 G10.10 40455 TORQUE_LIMIT_TIMEOUT 0 to 60s, OFF 0 to 600; 610
23 G11.4 40457 SUPPLY_UNDER_VOLTAGE
323 to 425V
586 to 621V 400V  3230 to 4250V
690V  5860 to 6210V
24 G11.6 40459 SUPPLY_OVE_VOLTAGE
418 to 587V
726 to 759V 400V  4180 to 5870V
690V

7260 to 7590V
25 G10.7 40109 CURRENT_LIMIT 0.25 to 1.50In, OFF 2048 to 12291
26 G10.15 41866 TORQUE_LIMIT 0% to +250% 0 to +20480