![background image](http://html.mh-extra.com/html/power-craft/high-pressure-cleaner/high-pressure-cleaner_operating-instructions-manual_1586357008.webp)
8
Operation with washing brush
The washing brush is ideally suited for the cleaning of vehicles.
Note: Please make sure that the washing brush is free from dirt or other
particles. Otherwise, it may cause defects in the paint work. Please
make also sure that the water flow is ensured.
Also a dry operation of the brush can result in damages to the paint work.
1. Attach the washing brush to the handgun.
2. See “Operation with high pressure”, items
and
.
Operation with detergent
Note: Operating the appliance with detergents is possible only while
using the rotating washing brush or the spray lance with pressure con-
trol. The following section describes the procedure to operate the appli-
ance with detergents and the spray lance.
Attach the spray lance with pressure control on the handgun, and set
the spray tube to low pressure („–“ direction).
Important: In the high pressure operation setting (pressure control to
”+”) and with the rotary nozzle detergent will not conveyed .
Mix 0.1 litres of universal cleaner concentrate with 1 litre of tap water.
Pour this detergent solution into the detergent tank.
Insert the detergent suction hose into the detergent tank.
See “Operation with high pressure”, items
and
.
Cleaning method
1. Step: Loosening the dirt
Spray the detergent on the dry surface and allow it to react, but not to
dry.
For the vehicle cleaning: Use the washing brush in addition.
2. Step: Removing the dirt
Spray off the loosened dirt with the high-pressure jet.
Interrupting the cleaning operation
For longer breaks in work (more than 5 minutes) switch off the unit.
The unit must never be left unattended when the motor is
running.
Summary of Contents for High-pressure cleaner
Page 15: ...15 ...
Page 16: ...01 06_5961993 0 ...