![background image](http://html.mh-extra.com/html/power-craft/high-pressure-cleaner/high-pressure-cleaner_operating-instructions-manual_1586357006.webp)
6
Initial Operation
A) First squeeze out the clip using a sharp object or similar.
B) Then you can pull out the clip.
C) Put the high-pressure hose into the handgun up to the stop. Press
the clip back into the handgun.
D) Use it to secure the high-pressure hose.
A) Insert a spray lance (or the washing brush) into the bayonet con-
nection of the handgun.
B) Turn it by 90 ° (B) until it locks into place.
A) Screw the quick-fitting coupling onto the water connection of the
unit.
B) Press the quick-fitting coupling of your water hose onto the coupling
of the water connection. The coupling must engage.
Connect the high-pressure hose to the high-pressure outlet.
The high-pressure hose must not be damaged (danger of
bursting). A damaged high-pressure hose must be replaced
immediately. Please call our service hotline in this case.
Connect your water hose to the water mains supply. Open the water
tap completely.
Caution! If the high-pressure cleaner is operated with a closed water
supply line, the cylinder head unit will be damaged. Never operate the
high-pressure cleaner with a closed water tap.
Insert the power plug into the plug socket.
Summary of Contents for High-pressure cleaner
Page 15: ...15 ...
Page 16: ...01 06_5961993 0 ...