![background image](http://html.mh-extra.com/html/power-craft/75045/75045_instruction-manual_1586317024.webp)
24
8. Front table
9. Plane depth adjustment knob (plane)
10. Blade housing
11. On/off switch
12. Stabilising holes
13. Thicknesser table
14. Plane depth indicator
15. Arm adjustment knob
16. Hole for depth adjustment (in back table)
An extractor nozzle, tools and blade adjustment
gauge are included (not illustrated).
Special safety instructions
For planing wood only.
Never use the machine if the blade is not correctly
locked in the blade housing.
When not in use, cover the blade housing.
Use a piece of scrap wood as a pusher when
planing small items.
Never allow fingers or tools to get near the blade
when machine is in use.
Never try to plane across the grain.
Test on/off switch regularly.
Mounting
Place on a level, stable surface.
Fit the side guide (2) using the two screws
supplied.
Fit blade guard arm (3) to back table (1) opposite
side guide.
Stabilise machine if required by passing a piece
of wood through stabilising holes (12) on base.
This is advisable if large items are to be planed.
Attaching extractor hose
Planing
Turn depth adjustment handle (7) anti-clockwise
to fully lower thicknesser table (13).
Connect extractor hose to thicknesser table under
the front table. The three studs in the extractor
nozzle slot into the corresponding holes on the
table.
Raise thicknesser table again by turning handle
clockwise, until nozzle fits tightly to underside
of table.
Fit adapter on nozzle and connect to extractor
system.
ENGLISH
INSTRUCTION MANUAL