![background image](http://html.mh-extra.com/html/power-craft/75045/75045_instruction-manual_1586317026.webp)
26
The item should be able to pass unhindered under
the guard.
Set side guide if required, if planer is to be used
for beveling.
Start machine at on/off switch (11).
Slide item slowly and steadily towards blade.
Thickness planing:
Arrange blade guard over blade housing and
secure in place.
Set thickness plane to desired depth using handle.
Planing depth can be seen on indicator (14).
Start machine.
Place item on thicknesser table on side of machine
with arrow, and slide slowly and steadily forward
with side to be planed facing upwards.
Wedge-shaped items must be planed thick end
first.
General
Switch off machine after use and remove chips and
dust from blades.
Cleaning and maintenance
Always disconnect machine from mains before
performing maintenance!
Servicing and replacing blades
Remove side guide and blade guard. Slacken
screws (d) with the screwdriver supplied.
Turn blade housing until holder (e) and blade (f)
can be removed.
Clean mounting bearings, blade housing and blade
with an oily cloth. Replace or sharpen blade if
blunted.
ENGLISH
INSTRUCTION MANUAL