![background image](http://html.mh-extra.com/html/power-craft/68997/68997_instruction-manual_1586257016.webp)
16
•
Switches and contacts can cause sparks during
use. Never use in the vicinity of flammable
liquids and gases etc.
•
Never use outdoors in wet weather conditions.
•
Never use if there is insufficient ventilation.
•
Always ensure it is placed on a level surface
and stands upright during use. Never place in
a car or near a car engine.
•
Always disconnect from the mains before
connecting or disconnecting cables from a
battery.
•
Always follow the battery manufacturer’s
recommendations for charging.
•
Never attempt to charge non-chargeable
batteries. Never recharge batteries with
capacity (in Ah) lower than the charger’s
minimum capacity.
•
Battery fluid contains sulphuric acid. Exercise
caution when charging batteries. In the event
of battery fluid spills on skin or in the eyes,
rinse thoroughly with water and seek medical
assistance.
USE
Charging car batteries
•
Open battery cells and check they are covered
by battery fluid. Add distilled water if not.
•
Set function selector (6) to charging position
(upper position; marked with battery symbol).
•
Set voltage selector (5) to position
MIN
for
charging 12 V batteries and
BOOST
for 24 V
batteries.
•
Set output selector (4) to position
1
for
ordinary charging or to position
2
for fast
charging (increases electricity consumption).
Never use fast charging for old batteries. This
can damage the battery.
ENGLISH
INSTRUCTION MANUAL
•
Connect the red start cable (1) to the battery’s
plus pole and to the correct clamp on the
charger (9 for 24 V, 11 for 12 V).
•
Connect the black start cable (2) to the
battery’s minus pole.
•
Insert the plug into the mains socket.
•
Press the on/off button (7).
•
The ampere meter (3) will show how much
current is being fed to the battery. The needle
will be to the extreme right when starting
charging. When the needle has reached the
extreme left of the ampere meter, the battery
is not receiving any more current and
charging is complete.
•
When charging is complete, switch off charger
at on/off button and disconnect from the
mains. Remove cables from charger first, then
battery.
•
Disrupt charging if battery fluid temperature
exceeds 45° C.
Summary of Contents for 68997
Page 21: ...21 EXPLODED VIEW ...
Page 22: ...22 PART LIST ...