![background image](http://html.mh-extra.com/html/power-craft/67986/67986_instruction-manual_1586320048.webp)
48
ENGLISH
INSTRUCTION MANUAL
•
Connect a charging cable to the DC outlet
(12) and then to the battery poles.
NB! The DC outlet pin on the generator must
be connected to the battery plus terminal.
Failure to do so can cause serious damage to
the generator and/or battery.
•
Do not allow the cable ends to touch each
other to avoid short-circuiting the battery.
•
If the generator is overloaded, the overload
cutout (11) will trigger. Reduce load and wait
a couple of minutes. Press overload cutout and
re-commence operation.
•
Disconnect charging cable from battery first
and then from generator when charging is
complete.
•
Stop charging if battery temperature exceeds
45° C or battery voltage exceeds 16 V.
Transport and storage
Transport
•
Use correct lifting technique when lifting
generator by its handle. Incorrect lifting can
cause personal injury.
•
Check vent screw on fuel tank is closed before
moving or storing generator.
Storage
•
Drain fuel tank and allow engine to run dry.
•
Drain engine oil (see chapter Cleaning and
Maintenance.
•
Remove spark plug, pour 2 cm
3
of new oil into
cylinder, pull starter handle 3-4 times to drain
remaining oil, replace spark plug.
•
Pull starter handle slowly until you feel
resistance. The valves will now be closed.
•
Allow to cool completely before storing.
•
Store in a dry, well-ventilated place.
Cleaning and maintenance
•
Always switch engine off before performing
maintenance.
•
Clean by wiping all surfaces with a damp cloth.
Regularly lubricate all moving parts with
lubricating oil and check for rust spots.
•
Check exhaust system for oil leaks daily.
•
The following maintenance should also be
performed at the recommended intervals.
Summary of Contents for 67986
Page 63: ...63 EXPLODED VIEW ...
Page 64: ...64 PART LIST ...